PRODUCTS

SMPS BATTERY CHARGER (150W TO 250W SELECTABLE.)

FEATURES

  • APPLICATION USE FOR 12V OR 24V/60-80AH SMF-LEAD ACID BATTERY
  • Proven Technology CVCC-PWM Control.
  • Latest mosfet technology for switching.
  • Very Compact Size/ Light Weight , Wide Input Range
  • Highly efficient /Cost effective / Easy to connect.
  • Guaranteed input to output isolation.
  • CVCC Characteristic for Battery Charging application.
  • Internally program or Selectable output voltage and current as per requirement.
  • Inbuilt battery reverse polarity protection with charger O/P Fuse blown indication
  • Inbuilt battery blocking diode provided.
  • Selectable output Charging voltage for 12V OR 24V SMF or LEAD ACID Battery
  • LED for Charger ON indication.
  • LED for Battery Selection. (12V OR 24V)
  • All double rated component used in product for reliability and long life.

SPECIAL FEATURES

  • Soft start on DC side.
  • Class-F insulation for all magnetic.
  • Automatic voltage regulation using digital control logic.
  • Filter circuit to limit ripple.

TECHNICAL DATASHEET (Specification)

INPUT
AC Input range
:
150V AC TO 300V AC (single phase)Our wide range for 230V AC input.
Frequency
:
47 to 63 HZ
Input Protection
:
Internal AC Fuse + Soft Start.
EMI Compliance
:
Inbuilt RFI/EMI Filter Provided
Hold up time
:
20 m Sec @ Minimum input
Fuse
:
Glass fuse 3A, 250V AC
OUTPUT
Voltage
:
Internally program as per 12V & 24V battery requirement with selector switch.
Current
:
Constant current Internally program (As required 60AH- 80AH battery).
O/P power
:
150 & 250W. Max.
Regulation
:
± 0.5% Line and Load.
Output ripple and noise
:
Less than 1% PK-PK.
Protection
:
O/P over voltage, over load & short circuit, Inbuilt battery blocking and battery reverse polarity.
Indication
:
LED for charger ON, LED for battery voltage & capacity selection.
Isolation
:
Between input & output up-to 2KV.
Working Temperature
:
(-)15° C to (+)85°C + ambient temperature.
Efficiency
:
Better than 80%.
Quality & Safety
:
to suit IEC 950 ,UL 1950
Enclosure
:
MS powder coated enclosure with enclosure wall mounting facility.
Cooling
:
Natural heat sink & fan for cooling.
Note
:
All Spacification are Subject To change without Notice.

TECHNICAL SPECIFICATIONS

MECHANICAL
  • L x D x H (mm) : 105 x 205 x 70mm. (Enclosure dimension 150W)
  • L x D x H (mm) : 125 x 200 x 95mm. (Enclosure dimension 250W)
  • Attractive price for bulk order.

Note : Send your enquiry with battery type, Battery voltage, and battery AH capacity., we will suggest you How much voltage and current is required to charge battery at peak level with safe condition.